|
Post by GTO on Jun 6, 2005 7:37:20 GMT 7
i was not feeling well and bedridden all day. Da** flu. Modified: Nick 1st & TQ, Khng 2nd, Esmail 3rd Stock: AK 1st & TQ, Audi 2nd, Kenneth 3rd
|
|
|
Post by RowdyRowdyPiper on Jun 6, 2005 7:41:38 GMT 7
|
|
|
Post by canshot on Jun 6, 2005 9:09:34 GMT 7
the skyline's ur..? ooo.. btw.. nice ride you've got there!
|
|
|
Post by GTO on Jun 6, 2005 9:31:15 GMT 7
quite nice pics...looks like your car need to go carwash :lol: this one is looking hot too, just need lower angle.
|
|
|
Post by GTO on Jun 6, 2005 9:39:18 GMT 7
Last Friday managed to move all my electronics to the 04D. Some problem with the servo link...wonder why it is so short, anyway other than that not much progress, probably use my ol RX7 for practice. I'm used to running spool with PVC, not sure if i can do the same with balldiff. We'll see.
|
|
|
Post by RowdyRowdyPiper on Jun 6, 2005 12:16:46 GMT 7
the skyline's ur..? ooo.. btw.. nice ride you've got there! thanx
|
|
|
Post by RowdyRowdyPiper on Jun 6, 2005 12:18:16 GMT 7
bro u not referring to my 1:1 scale car right... i noe i hav not wash it for many months...
|
|
|
Post by RowdyRowdyPiper on Jun 6, 2005 12:20:19 GMT 7
Last Friday managed to move all my electronics to the 04D. Some problem with the servo link...wonder why it is so short, anyway other than that not much progress, probably use my ol RX7 for practice. I'm used to running spool with PVC, not sure if i can do the same with balldiff. We'll see. sounds gd
|
|
|
Post by GTO on Jun 6, 2005 13:31:47 GMT 7
i think both your CLK and your Fit need to wash :lol:
|
|
|
Post by GTO on Jun 7, 2005 12:14:59 GMT 7
|
|
|
Post by RowdyRowdyPiper on Jun 7, 2005 12:33:24 GMT 7
wonder wat tires are those?? yok??
|
|
|
Post by GTO on Jun 7, 2005 12:39:47 GMT 7
looks like HPI D cos it's solid wihtout ring
|
|
|
Post by RowdyRowdyPiper on Jun 7, 2005 13:39:52 GMT 7
mayb... the new yok also doesn hav any rings... if i'm not wrong
|
|
|
Post by GTO on Jun 7, 2005 13:49:02 GMT 7
mayb... the new yok also doesn hav any rings... if i'm not wrong have ring but wider. instead of 2 at the side, change to one wide in the middle
|
|
|
Post by GTO on Jun 7, 2005 13:50:42 GMT 7
courtesy of free time: and free time 2:
|
|
|
Post by GTO on Jun 7, 2005 13:57:10 GMT 7
the old bugger that cost me lunch for 10days!!!
|
|
|
Post by RowdyRowdyPiper on Jun 8, 2005 7:50:37 GMT 7
Setup Updates For 04R: Front Springs: HPI BLACK Rear Springs: HPI GOLD
NOTE: Setup is good for Serangoon MSCP(very rough surface) and any lower deck of MSCP(less grippy)... jus replace PVC with tires wrap wif insulating/duct tape...
But the Pro 2 needs somemore adjustment(even after adding oneway), not as nice as the 04... mayb the power band not as nice as the 04...
|
|
|
Post by GTO on Jun 8, 2005 7:59:52 GMT 7
err....dun have HPI springs leh. What's the rough equiv to Tamiya's arh? White-Blue or White-Yellow? U forgot to pass me e ctr 1way...
|
|
|
Post by RowdyRowdyPiper on Jun 8, 2005 8:06:35 GMT 7
i check and let u noe...
aiyah forgot... was rushin back... ;D
|
|
|
Post by GTO on Jun 8, 2005 8:08:27 GMT 7
oops... let me noe if u not goin to the race... anyway if i do drift it will be near my place...but need some corner markers...will post to inform the location... need to make sure sunday got no cars on the upper most level most probably i have to be there even if i don't race. Work work work only if rain then i don't go...lol go MSCP drift drift :wink:
|
|
|
Post by GTO on Jun 8, 2005 8:09:23 GMT 7
|
|
|
Post by GTO on Jun 8, 2005 8:19:27 GMT 7
in case anyone want to run belt cars, here's a usefull info: TA04 can't drift with both FR ball differentials. Initial setting was F tight, R loose. It lasted a pack before F become loose and R super smooth. This point car refuse to turn and tend to spin. dabomb tested and commented: how da hell can you drift with this car? :lol: at least it lasted a pack.
|
|
|
Post by GTO on Jun 8, 2005 8:57:14 GMT 7
look at the F camber+caster angle, Yok D on rough tarmac , 0.5 block at R
|
|
|
Post by GTO on Jun 8, 2005 8:58:45 GMT 7
and radical R upper link mounting point
|
|
|
Post by RowdyRowdyPiper on Jun 8, 2005 10:01:01 GMT 7
look at the F camber+caster angle, Yok D on rough tarmac , 0.5 block at R bro pic not appearing...
|
|
|
Post by GTO on Jun 8, 2005 10:02:32 GMT 7
right click and show image. pic is da** big
|
|
|
Post by RowdyRowdyPiper on Jun 8, 2005 10:07:13 GMT 7
should hav said earlier
|
|
|
Post by GTO on Jun 8, 2005 10:12:15 GMT 7
it did come up on my browser...
|
|
|
Post by GTO on Jun 8, 2005 11:31:42 GMT 7
larger diameter PVC....on Yok D, although the same PVC it may jack 'the 'looks' up a bit. Can try on ready to dispose racing tyre (instead of those xp Yok D), what u say professr M?
|
|
|
Post by GTO on Jun 8, 2005 11:33:06 GMT 7
the locking ring is temporary, to hold the PVC CA-glued to the rubber.
|
|