Team Drift Force Driver Setup

[Minerva]

Kit Profile
Yokomo MR-4TC SD CGM Special

ESC: Tamiya TEU 101BK
Motor: Tamiya Sports Tuned
Servo: Futaba 3003
Connection: Tamiya
Transmitter: Futabu MJ 3PHKA
Receiver: Futaba R122JE
Frequency : 27.095 AM

Shock: Yokomo DRIFT STAGE 1 oil shock
Springs: Front Orange, Rear Red
Tyre: PVC

Pinion Gear: Kawada Duralumin 48 Pitch 30T
Spur Gear: Team Speedmind Duraylon 48 Pitch 70T
Shaft: Yokomo Hollow Graphite Main Drive Shaft

Transmission:
Front: HD Front One-way / Ball Differential
Rear: Ball Differential


Full Metal Ball Bearings
Alum Steering Bellcrank Posts
Machined Aluminum Motor Cam (Blue Adodized)
Titanium Screw Set

Upgraded to


Yokomo DRIFT STAGE 1 Upgrade Kit


Yokomo DRIFT STAGE 2 Upgrade Kit

Rear Toe In: +3
Front Toe In: -1

Rear Offset: 0mm
Front Offset: 0mm


BodyShell : Tamiya Nissan Xanavi Nismo 350Z / HPI Lamborgini Gallardo / Yokomo D1 HKS Hiper S15

Charger: Speed EX15 pro / MW Auto Detect Wall Charger
Battery: 2 X GP 3300 mah, 2 X Topcad 1700mah, 8 X GP 2300mah AA-sized

Transmitter Throttle EPA Forward: 80% - 100%
Transmitter Throttle EPA Reverse: 100%
Transmitter Steering EPA Left: 80%
Transmitter Steering EPA Right: 80%

Bling blings: Yomoko Disc Brake + License Plate Set, Yomoko Windshield Wiper, Yokomo DRIFT RAYS GRAMLIGHTS HD Wheels, HPI GT Wing Set, ABC Light Kit, Long Body Clip Pins, HPI Bodypost Extension

[Kido Seishirou]

I will transfer all my setup onto a Setting Sheet. Stay tune ;D ;D ;D

[Ed]

Kit Profile
Chassis: Yokomo Drift Kit (MR-4TC)
Shock: yokomo shocks
Spring: yellow spring
Pinion Gear: Stock
Spur Gear: Stock
Shaft: Stock
Rear Toe In: +2
Front Toe In: -2
ESC: Futaba MC330CR
Servo: Futaba 3003
Reciever: Futaba R142JE
Transmitter: Futaba T2PHKA
Feq: 27.640AM
Motor: Yokomo Drift Spec D1 zero
Connection: Dean
Team bodyshell: HPI RX7FD
Bodyshell: Yokomo D1 S15, EG6, S13

[housemartiniz]

Congrats on the addition of AGP and Ed to the Drift Force army!
;D ;D ;D

[Minerva]

Haha!~ Good to have more members to play with!

[Minerva]

New kits!!!!

[Kido Seishirou]

Team members who using Yokomo, can use this setting sheet for yr setup. It can be use during RC series.
For Tamiya TA05, here
For Tamiya Evo 5, here

Sry to say there is no setting sheet for TT01.