|
Post by Rubbish on Nov 9, 2005 7:41:31 GMT 7
Here is my setup for TT01 (Not the D version) and hopes it help
Chassis : Tamiya TT01 Hop Up : Tamiya TT01 Alloy Shaft, Tamiya Speed Tuned Gear (55T/25T), Rear Toe In Block, Camber Kit, Tamiya CVA Shock ESC : Tamiya TEU 101BK Servo : Sanwa 102 Controller : Sanwa M11 Motor : 540J Rubbish Tuned (X) BodyShell : Tamiya R34
Camber : 0 Caster : Stock Front Toe In : +2 Rear Toe In : -2 Front Shock: 2 hole TRF Piston with 0wt oil Rear Shock : 2 hole TRF Piston with 0wt oil Front Spring : Stock Spring Rear Spring : Tamiya Super Short Spring (RED) Front and Rear Height : 8mm Front Diff : Tamiya Grease Rear Diff : BP high Temp Grease Ackerman : Inside Hole Rims : 0 offset PVC : 0
Hope u guys understand what i am writing here and the setup may change again, will try to update here if possible.
|
|
|
Post by poleposition on Nov 11, 2005 11:25:08 GMT 7
Rubbish,
What is the wt of the shock oil?
|
|
|
Post by MiVeC on Nov 11, 2005 19:08:38 GMT 7
wat do u mean by front toe-in= +2 & rear toe-in= -2? i dun understand... can u change it to toe-in and toe-out instead? thanks
|
|
|
Post by poleposition on Nov 17, 2005 8:32:48 GMT 7
Mivec,
From my understanding +2 is actually toe out at front \ / 2deg & rear toe in 2 deg / \. Normal TT-01 does come with a fixed arm (plastic part no. B1) for steering so u need to replace it with a pair tie rod set (just like the TT-01R & TT-01D) where u can make adjustment. Hope it helps.
|
|
|
Post by Rubbish on Nov 17, 2005 17:25:53 GMT 7
The 0 weight in the shock oils mean no shock oil inside. Cause this way the car have a faster reaction and more Grip
|
|
|
Post by poleposition on Nov 20, 2005 23:08:37 GMT 7
Thanks bro!
|
|
|
Post by domonizo on Nov 21, 2005 6:27:37 GMT 7
how can the suspensions work without oil man...i'm eager to find out...means it's only the springs supporting it/
|
|
|
Post by Champagne Supernova™ on Dec 23, 2005 2:29:21 GMT 7
yep! just the springs!
|
|
|
Post by Rubbish on Dec 23, 2005 13:56:53 GMT 7
how can the suspensions work without oil man...i'm eager to find out...means it's only the springs supporting it/ FYI the damper oil is used to control your car reaction and the speed your suspension react. The reason being is that i find my car reaction was too slow and not enough traction and lazy to buy a 10wt oil so i took out the oil inside the shock. Anyway IT IS the spring that is supporting the car, and the oil to damper the car.
|
|
|
Post by driftinmikey on Jan 7, 2006 6:53:52 GMT 7
it says in your sign. that you have a pro 3. do you use it for driftin' or what? If so whats your set-up? most greatful for help.
|
|
|
Post by Rubbish on Jan 8, 2006 1:45:16 GMT 7
Sorry but my HPI Pro 3 is now with Dabomb and also i forgot the setting. Sorry but u got to ask him
|
|