|
|
Post by shiun on Feb 16, 2006 11:45:59 GMT 7
John.... shall we get something like this?!?!?! ;D then can hover both upwards and downwards liaoz...  SPECIFICATIONS Stock Number: GPMG4501 The V-Pitch (Variable Pitch) Unit Design: Push-Pull Housing/Arms: ABS Rotor: Aluminum Blades: symmetrical; fiber-reinforced nylon Shaft: Steel; 0.04 x 6.02 in (1 x 153 mm); factory-installed Bearings: (5); shielded. The RimFire™ Brushless Outrunner Motor Model No: 22M-1000 Input (V): 7.2-12 Max. constant amps: 11 Max. surge amps: 15 No-load amps: 0.65 Internal resistance (ohms): 0.234 Motor (dia. x length): 1.1 x 1.14 in (28 x 29 mm) Shaft (dia. x length): 0.16 x 1.73 in (4 x 44 mm) Bearings: (2); shielded Total package weight: 2.1 oz (59.5 g) Includes: RimFire motor w/factory-installed shaft and 2mm male, gold-plated bullet connectors, variable-pitch unit, blades and mounting hardware. Requires: dedicated proportional radio channel, micro servo w/17 oz-in of torque (min.) and brushless ESC w/governor (GPMM2075 recommended). |
|
|
|
Post by GTO on Feb 16, 2006 11:54:19 GMT 7
think this one, from the propeller size, is not strong enough to push-pull our 700g 3D plane.
something like profile DIY one looks more feasible.
|
|
|
|
Post by GTO on Feb 16, 2006 12:00:29 GMT 7
the CPPS may work on my next project (tan ku ku) should it ever take off.... and sometime after i got my flying license of the 3D fish. this one is looking cool and flew well...  |
|
|
|
Post by shiun on Feb 16, 2006 13:03:48 GMT 7
hmmm...
cant we change to a bigger prop???
if there is a higher powered motor lar...
then can try rite.
then there will be 2 flying fishes hovering up and down.... keke
|
|
|
|
Post by GTO on Feb 17, 2006 1:39:46 GMT 7
that one is freakin ex... how about this?  |
|
|
|
Post by shiun on Feb 17, 2006 9:56:56 GMT 7
Kwel.......
is it available in singapore?1?!?!
looks nice too yah...
blue color
|
|
|
|
Post by GTO on Feb 17, 2006 12:02:04 GMT 7
rumour has it, not yet released but....
i already have the motor for it...
so next time just get the hollow shaft + CPPS.... ha!
|
|
|
|
Post by shiun on Feb 17, 2006 13:21:44 GMT 7
huh.....
but dun u have to change the original motor shaft to the hollow one?
Soooo
thats the BL u got at FH ar......
interesting!!!
will see how well it flies on sat!!!
|
|
|
|
Post by GTO on Feb 17, 2006 13:37:55 GMT 7
that one is 2812-1080, mine is 2812-0850 more power.... wohooo. Same shaft tho, as i told you, the hollow shaft + CPPS not yet available... so step by step loh.  |
|
|
|
Post by shiun on Feb 17, 2006 13:50:59 GMT 7
yup the CPPS not available yet so if next time wana change to the CPPS only need to change the hollow shaft ar?
so simple only meh???
heeeee
hmmm the motor looks cool!!!
should i get one of thoes too.....
after the gears are stripped lar....
haaaa
|
|
|
|
Post by GTO on Feb 17, 2006 14:43:26 GMT 7
yes i suppose so.
i think no need to wait till the gear strip lah, u can use that gearbox for your slowstick... motor so power sure shoot like arrow (then become faststick)...
|
|
|
|
Post by shiun on Feb 17, 2006 15:32:39 GMT 7
haaaaa
yeah dats wat i wana try out....
named slow lar but infact might not be slow....
keke
wanted to try a brushless on it ley...
hmmm haven really draw out the plan yet....
need to reduce the size from a size .40+ engine place to a EP.......
stressed...... calculations
|
|
|
|
Post by dabomb on Feb 19, 2006 21:23:14 GMT 7
singapore already has it last year..
i reserved one but let it go ...ha...
|
|
|
|
Post by shiun on Feb 20, 2006 8:20:39 GMT 7
aiyoh y let it go...
can try it out and see if it works for 3D palne.......
haaaa
|
|
|
|
Post by dabomb on Feb 20, 2006 16:46:29 GMT 7
the motor not powerful enough to fly heavy plane so i let go first ...waiting for another one that can power heavier plane..
|
|
|
|
Post by GTO on Feb 20, 2006 16:56:59 GMT 7
props look a bit small.... probably for profile 3D should be best.
|
|
|
|
Post by shiun on Feb 20, 2006 20:04:27 GMT 7
yeah.. mayb can get 1 and try it on the 3D yah....
but 1st of all gota let zhirong test it out 1st....
dun wan it to turn out like my cessna......
haaaaa
|
|
|
|
Post by nixaad on Mar 31, 2006 12:45:29 GMT 7
Where to get the CPPS leh, fook hai got or not?  |
|
|
|
Post by GTO on Mar 31, 2006 12:55:46 GMT 7
nope, hv to pre-order.
Mostly for 4D flying.
|
|
|
|
Post by hysteria on Apr 11, 2006 18:29:02 GMT 7
|
|
[glow=White,2,300]Tamiya TRF415MSX Refine II[/glow] Tamiya TZ VFS-1 Pro/VFS-FR
