dark
New Drifter
***Team Adrenaline Rush***
Posts: 35
|
Post by dark on Nov 9, 2006 23:59:46 GMT 7
According to my researched i believe that the internal ratio of the Kyosho pure ten alpha is 3.36. internal ratio= 3.36 sutiable spur and pinion Spur:Pinion:Internal ratio 55T:35T:5.28 55T:33T:5.6 80T:45T:5.97 75T:45T:5.6 (I dunno is there a Pinion gear that has 45T, got to check out ) The whole car is a aero mode because it is a touring car. The ride height of the back must change to make it the same as the front, the two screws at the back that helps in changing the ride height should change in the screw's length not 12mm maybe about 30mm to 40mm. The rims can change into speedmind rims. Kyosho Hi-speed motor is not a good motor for a kyosho rc car that drift, a tamiya sport tuned motor or a drift master motor will do the job. Hope this will help out people who are using Kyosho
|
|
|
Post by J on Nov 10, 2006 2:11:29 GMT 7
the ride height does not need to be exactly the same front and rear, depends on the balance desired for drifting. dun understand wat u mean "12mm, maybe 30mm to 40mm." on last count there are 3 people using kyosho alpha3s. long live the kyosho revolution.
|
|
|
Post by navlem on Nov 10, 2006 8:25:34 GMT 7
yeah i missed out the "12mm, maybe 30mm to 40mm." part too...
|
|