|
Post by sidewaysr34 on Dec 31, 2006 10:43:37 GMT 7
sorry if this is the wrong place to post. please redirect if required.
i am having severe problems with my tt01. i have been running it for days since i bought it with no problems.
right now i have the sport tuned motor installed. however, the factory gears do not touch each other. i tried the 55/25 combo as directed & they do not touch. but when i use the 61/24 or 61/25 combo it locks up & is very sluggish. . .no play in the wheels or shaft. any thoughts??
it never did this until i swapped the gears. they are true tamiya parts & not ebad knockoffs. help? thanks to all.
|
|
|
Post by ah hai on Dec 31, 2006 11:16:28 GMT 7
hmm... u have to change the position of the motor mount.. check the red paper in the pinion packet.. this might solve your gear problem..
for the rest, i guess u have to bring it down to one of the drift meets.. im sure they will help u
|
|
|
Post by sidewaysr34 on Dec 31, 2006 12:12:16 GMT 7
forgive me for asking a stupid question, but how is the position changed? i can tell there are several screw holes, but every hole it only gets worse. that is of course if the mount is still supposed to face in the downward position, flat part facing down. i am going to keep at the holes until i find any other info. thanks much though!
|
|
|
Post by ah hai on Dec 31, 2006 13:48:08 GMT 7
check that motor mount chart.. your screws alignment should be the same as the 25-55 position.. haha.. where u stay?
|
|